STREAMLINE

Inventory in Uspacy: the Warehouse & Inventory app vs KeyCRM vs Dilovod vs a BAS/1C sync

Can you manage inventory in Uspacy?

You can, but not with the built-in tools. Uspacy has a product catalog, but no warehouses, reserves or cost of goods. Those three things come with the Warehouse & Inventory app by Auspex Streamline. You install it from the Uspacy Marketplace, and it works inside the portal: stock documents, stock levels and reports sit next to your deals and catalog products. According to the app's documentation, it has:

  • warehouses: add, rename, switch on or off; how many can be active depends on the plan;
  • stock documents: supplier receipts, stock additions, write-offs, transfers between warehouses, stocktakes and customer returns; stock levels change only once a document is posted;
  • reserve and write-off by deal stage: for each pipeline, an administrator picks the stage that reserves goods and the stage that writes them off, and if stock runs short, the module leaves a comment on the deal;
  • a negative-stock check: stock never drops below zero on any date or in any warehouse, even when a document is backdated;
  • weighted average cost, one figure across all warehouses, recalculated after a backdated document;
  • reports: stock on any date, stock movement, gross profit by deal and by product; only the portal owner and administrators see cost and profit;
  • printing: goods received note, transfer note, write-off report, stocktake sheet.

The app has its limits. It handles inventory, not accounting: its documentation has no tax reporting or VAT accounting, cost is calculated only by the weighted average method, and the interface comes in Ukrainian and English only. If that's what you need, look at Dilovod or BAS below.

Four options compared on five criteria

The points are the same for all four: what the product is, how it connects to Uspacy, warehouses and documents, reserves, and cost. About the competitors we state only what their official websites and help pages say as of 14 October 2026.

The Warehouse & Inventory app by Auspex
  • What it is: an app for Uspacy that does inventory and nothing else.
  • Connection to Uspacy: works inside the portal and installs from the Uspacy Marketplace; there's no integration to build.
  • Warehouses and documents: several warehouses (the number depends on the plan); receipts, stock additions, write-offs, transfers, stocktakes, returns.
  • Reserve: automatic by deal stage, with available stock shown on the deal card.
  • Cost: weighted average, one across all warehouses, recalculated for backdated documents.
KeyCRM
  • What it is: a separate CRM for online stores and marketplace sales, with inventory built in.
  • Connection to Uspacy: Uspacy isn't among the integrations on the KeyCRM website; there's an open API.
  • Warehouses and documents: stock for each warehouse; stock additions, transfers, stocktakes, write-offs; stock levels are sent to marketplaces automatically.
  • Reserve: goods are reserved and written off when an order moves to the right status; the stock view shows the total quantity, the reserve and what's available to sell.
  • Cost: the purchase price is recalculated as a weighted average when stock is added; cancelling a stock addition doesn't restore the previous price in the catalog.
Dilovod
  • What it is: a cloud accounting program that, in the developer's words, combines management, financial and tax accounting.
  • Connection to Uspacy: no ready-made integration in its integrations section; the CRMs described there are KeyCRM and Salesbox, both third-party and set up through partners; there's an API.
  • Warehouses and documents: inventory is part of every package; goods received and dispatch notes, returns, write-offs, transfers, stock additions, stocktakes.
  • Reserve: the developer states that goods can be reserved in the warehouse ahead of a sale, and that it tracks actual, available and expected stock.
  • Cost: weighted average, FIFO or LIFO; FIFO and LIFO are available only with batch tracking.
A BAS/1C sync
  • What it is: your company's accounting system (BAS Trade Management, for example), with which Uspacy exchanges data.
  • Connection to Uspacy: no ready-made sync; according to Uspacy, there are only templates that get customized for a specific 1C setup over the API and webhooks.
  • Warehouses and documents: according to the BAS developer, inventory management that includes bin locations and tracking down to serial numbers and expiry dates.
  • Reserve: reserving goods is listed in the BAS Trade Management description; in the CRM, you see the reserve only as far as the sync passes it on.
  • Cost: monthly average or FIFO by batch.

How does the app differ from KeyCRM?

The main difference is where your sales live. KeyCRM is a separate CRM built around online store orders: marketplaces, delivery services, shipping waybills in one click. Inventory is built in and comes with its single plan. So choosing KeyCRM for its inventory means moving orders from Uspacy deals into KeyCRM, or running two CRMs and linking them yourself through the API, since the KeyCRM website lists no ready-made integration with Uspacy.

On inventory alone, the two are close: several warehouses, reserve and write-off by status or stage, a weighted average purchase price. KeyCRM is stronger where stock has to be pushed to marketplaces automatically. The app is stronger where control has to be strict: it won't post a document that would take stock below zero on any date, and it recalculates cost after backdated documents.

If you sell mostly through an online store and marketplaces and don't have Uspacy yet, KeyCRM is a sensible choice. If your team already works in Uspacy deals and pipelines, a second CRM just for inventory will create more work than it saves.

How does the app differ from Dilovod?

Dilovod is an accounting program, and the app is an inventory module in a CRM. In Dilovod, inventory is part of financial and tax accounting: delivery notes, VAT, reporting, several costing methods, batch tracking. If you keep your books in Dilovod or plan to move there, the app won't replace it; the only question is how to pass Uspacy deals to it. Dilovod has no ready-made integration with Uspacy, so the link is built through its API, which comes with packages from “Profi +” upward.

The app is the better fit when an accountant keeps the books separately in their own program, and sales reps need to see available stock and reserves right in the deal, without switching between systems and without an integration project.

When is a BAS/1C sync the better choice?

When your accounting already runs smoothly in BAS or 1C and nobody plans to move it. Their inventory features go deeper than the app's: bin locations, serial numbers and expiry dates, FIFO costing by batch, and joint use with BAS Accounting. In that case the CRM doesn't keep inventory itself; it shows stock and statuses from the accounting system.

There's no ready-made button for this. In an article dated 18 February 2026, Uspacy itself writes that there are only templates, which have to be customized for the specific 1C setup and business model. A typical sync looks like this: the counterparty and an invoice or an order with line items go from the CRM to 1C, and the payment status, document number, shipment confirmation and sometimes stock for key items come back. Auspex builds this kind of sync as a separate development project, estimated separately from the CRM implementation.

A sync makes no sense if 1C is kept for reporting while actual stock is counted in spreadsheets: it would only carry the discrepancies into the CRM. In that case it's simpler to start with inventory in Uspacy itself.

How much does it cost?

Each of the four options charges differently: by number of warehouses, by order volume, by accounting package, or by licence plus project. The prices below come from the official websites as of 14 October 2026, in the currency the vendor quotes.

  • Warehouse & Inventory: a 14-day trial with every feature, then ₴790 a month for one warehouse, ₴1,490 for up to three or ₴2,490 for unlimited warehouses; paying yearly saves 20%. The price depends only on the number of active warehouses. Auspex customers get special terms.
  • KeyCRM: a single plan at $19 a month with no limit on users; it includes 200 orders, 2,000 requests and 20,000 messages, and each further block of the same size costs $9. Connecting sources with sync costs another $19 a month.
  • Dilovod: packages from €15 a month (“Profi”, one user) to €149 (“Korporatsiia”); the API comes with packages from “Profi +” at €20. Paying for 6 months saves 5%, for 12 months 15%; the trial lasts 7 days.
  • BAS/1C: the BAS developer's website doesn't list licence prices; BAS is bought and implemented through members of the Business Automation Union, and support runs under an ITS contract. On top of that comes the project for the sync with Uspacy.

Which option to choose

If your sales already run in Uspacy and a separate program handles the books, the simplest way to keep inventory is the Warehouse & Inventory app: it sits in the same portal, reserves goods by deal stage and needs no integration. KeyCRM is worth taking when your main channel is an online store and marketplaces and you're ready to run orders there instead of in Uspacy. Dilovod is better when you need accounting with tax reporting and inventory as part of it. A BAS/1C sync pays off when your accounting already runs there and the CRM should get stock and statuses from it.

How we compared: Auspex develops the Warehouse & Inventory app, so we describe it from its documentation. Everything about KeyCRM, Dilovod and BAS comes from their official websites and help pages as of 14 October 2026, linked in the sources below. If a vendor doesn't claim something on its website, we don't claim it here. None of the vendors pays us.

Sources

Frequently asked

Does Uspacy have inventory management?

Not built in: Uspacy has a product catalog, but no warehouses, reserves or cost of goods. Those come with the Warehouse & Inventory app by Auspex. It installs from the Uspacy Marketplace and works inside the portal: warehouses, stock documents, reserve and write-off by deal stage, weighted average cost and reports.

Does KeyCRM integrate with Uspacy?

There's no ready-made integration: as of 14 October 2026, Uspacy isn't on the list of integrations on the KeyCRM website. KeyCRM has an open API, so you could write a connection, but these are two separate CRMs. If you sell in Uspacy, it's simpler to add inventory there with an app than to keep two systems in sync.

Can you connect Dilovod to Uspacy?

Dilovod's integrations section has no ready-made integration with Uspacy; the CRMs described there are KeyCRM and Salesbox, both third-party. Dilovod has an API for reading and writing data, included in packages from “Profi +” upward. So a connection is possible, but it's development work, not an app install.

Is there a ready-made Uspacy integration with BAS or 1C?

No. Uspacy writes that there are only templates, which get customized for a specific 1C setup over the API and webhooks. Usually the counterparty and an invoice or order go from the CRM, and the payment status, shipment and sometimes stock come back. Auspex builds this kind of sync as a separate development project, estimated separately from the CRM implementation.

How much does inventory management for Uspacy cost?

The first 14 days after installation are a trial with every feature. After that it's ₴790 a month for one warehouse, ₴1,490 for up to three or ₴2,490 for unlimited warehouses; paying yearly saves 20%. You pay by card: in hryvnias on a Ukrainian portal, in euros (€15, €29 or €49 a month) when the module runs in English. Auspex customers get special terms.

When is the Warehouse & Inventory app not enough?

When inventory has to be part of financial and tax accounting: VAT, reporting, batch tracking, FIFO. The app handles inventory only, with weighted average cost. In that case look at an accounting program such as Dilovod or BAS, and link it to Uspacy with an integration.

Business automation digest

2–3 emails a month — what actually works in CRM and automation.

No spam. Unsubscribe in one click.

Free CRM audit →
↳ FREE AUDIT 30 min · free · ↓

Ready to Get Your Sales Under Control?

Free process audit — 30 minutes, and you'll receive:

You keep the loss map and the implementation plan after 30 minutes — even if you never become a client. No obligations.

We'll attach to your request the pages of this site you viewed and how you found us. Details in our Privacy Policy.

1,200+ companies since 2015 · 30-day median go-live

01 A map of where you're losing leads
02 Priorities: what to automate first
03 An implementation plan with stages and timelines
We'll call within 24 hours. The plan is yours, even if we don't work together.